Blanching Equipment
Two Hull and Double Network Chain Washing and Sterilizing Line
Introduction:
The raw shallots are cut into roots, washed with high pressure to remove mud, peeled off the old skin, yellow leaves and diseased leaves. After passing the secondary cleaning and selection, they enter the unit.
The material is conveyed to the disinfectant solution containing sodium hypochlorite through the mesh chain. Under the synchronous clamping and driving of the upper and lower mesh chains, the material is soaked while walking. The disinfectant solution in the water tank is in the cycle due to the action of the fluoroplastic alloy centrifugal pump In the process, the sterilized material enters the cyanide killing tank through the air partition, is briefly blanched in water at 60 ° -70 ° C, and then enters the next process after spray cooling.
The soaking time of the material during the disinfection process is controlled by the frequency conversion device. Since the whole unit is a power source and the upper and lower mesh chains have the same speed ratio, the material is always in an orderly manner during the travel.
Discontinuing the supply of disinfectant can also be used for net chain transportation, killing cyanide, cleaning, spraying and cooling.
Notes for use:
1. Machine transmission part, refuel regularly;
2. Production capacity: 1000-2000kg / h
3． Dimensions: 15500 × 900 × 1300
4． Equipped with power: 3kw + acid pump 3Kw
It can also be used for disinfection, sterilization, killing and cleaning of related materials.
Note: The machine drive part, refuel regularly;
This series of products are repaired for one year, and lifetime maintenance service
- 1000-2000kg / h
产量 - 3Kw
功率 - 15500 × 900 × 1300
外形尺寸
Production capacity: 1000-2000kg / h
Dimensions: 15500 × 900 × 1300
Equipped with power: 3kw + acid pump 3Kw
customizable
Introduction:
The raw shallots are cut into roots, washed with high pressure to remove mud, peeled off the old skin, yellow leaves and diseased leaves. After passing the secondary cleaning and selection, they enter the unit.
The material is conveyed to the disinfectant solution containing sodium hypochlorite through the mesh chain. Under the synchronous clamping and driving of the upper and lower mesh chains, the material is soaked while walking. The disinfectant solution in the water tank is in the cycle due to the action of the fluoroplastic alloy centrifugal pump In the process, the sterilized material enters the cyanide killing tank through the air partition, is briefly blanched in water at 60 ° -70 ° C, and then enters the next process after spray cooling.
The soaking time of the material during the disinfection process is controlled by the frequency conversion device. Since the whole unit is a power source and the upper and lower mesh chains have the same speed ratio, the material is always in an orderly manner during the travel.
Discontinuing the supply of disinfectant can also be used for net chain transportation, killing cyanide, cleaning, spraying and cooling.
Notes for use:
1. Machine transmission part, refuel regularly;
2. Production capacity: 1000-2000kg / h
3． Dimensions: 15500 × 900 × 1300
4． Equipped with power: 3kw + acid pump 3Kw
It can also be used for disinfection, sterilization, killing and cleaning of related materials.
Note: The machine drive part, refuel regularly;
This series of products are repaired for one year, and lifetime maintenance service
Two Hull and Double Network Chain Washing and Sterilizing Line
-
Screw Blanching Machine
-
Belt Blanching Machine
-
Two Hull and Double Network Chain Washing and Sterilizing Line