Introduction and principle:

    This unit is a new product imitating the equipment imported in 2005. It is composed of a hoist, a magnetic vibrating screen wind separator and a dust collector.

    The material is sent to the inlet end of the screen frame with electromagnetic vibration device by the hoist. The screen frame undergoes periodic reciprocating vibration under the action of electromagnetic force. The material in the screen frame is constantly being thrown up and jumping forward. When the materials move forward uniformly and continuously, they are automatically classified through 45° plexiglass diagonal sieve holes of different specifications, and small crushed powder particles and super large particles are collected into different levels of recycling bins. The rest of the materials enter the air cavity, and the heavy objects mixed in the materials fall into the heavy object recovery box through the effect of the floating air flow. The light objects are taken to the cyclone dust collector and enter the waste material recovery box through the wind shutoff. The genuine product is sent from the front end to the next process.

    The unit has automatic feeding, continuous operation, stepless air regulation, and high sorting accuracy. It can be combined with X-ray machine, metal detector, etc. to form a new product packaging line. It is an ideal packaging equipment for the post-processing of dry materials in the vegetable processing industry and the food industry.

Technical Parameters

    1. Scraper hoist:

        Drive motor: micro gear motor 380V

        Conveyor belt: width 380mm, belt thickness 2mm, conveyor belt center distance 2000mm, food grade PVC;

    2. Magnetic vibration winnowing machine:

        Screening mesh plate: ￠3.5, ￠5, ￠7, ￠12, ￠16, ￠20 for user customization

        The floating airflow fan uses the DLF series external rotor direct-connected centrifugal fan with a power of 0.45KW;

    3. Cyclone:

        The suction fan is a multi-wing low-noise centrifugal fan with a power of 1.1KW and a voltage of 380V

        Wind shutter YCJT-60 gear reducer motor power 60W voltage 380V

        Self-equipped dust bag

        Dimensions: 1100X1000X2300

    4. Processing capacity:

        Dry onion 200～400kg/h, sugar product 800～1000kg/h

    5. Dimensions:

        Whole machine (excluding dust collector) 3500X1300X1900;

Precautions for use

    The machine has been debugged before leaving the factory. When processing different products, necessary debugging is required. The steps are as follows:



    (1) When the vehicle is running empty, if abnormal vibration is found in the electromagnetic vibration part, you can fine-tune the amplitude adjustment knob on the power distribution cabinet and observe the amplitude change. The ammeter indication should be within the rated range (1-2.3A), which is caused by excessive current. Resonance, the noise increases and the coil burns out.

    (2) Different materials need to change the position of the discharge end of the screen frame. When changing the horizontal position, loosen the 4 bolts of the electromagnetic vibration base under the screen frame to move the base forward or backward; when changing the height position, tighten or loosen the bolts on the four corners of the frame properly. .

    (3) The separation effect of genuine, light foreign matter and heavy foreign matter is related to the adjustment of the No. 1, 2 and 3 adjusting screws shown in the left picture and the adjustment of the frequency converter that controls the fan. Repeated adjustment tests and records are required.

This series of products have a one-year warranty and lifetime maintenance service. Illegal operations are not within the scope of the warranty.

Magnetic vibration sieve winnowing machine

• 

  Magnetic vibration sieve winnowing machine

• 

  Through Magnetic Machine

• 

  Stem and Leaf Winnowing Machine

• 

  LG-380 Metal Detector

• 

  ​ND150 Winch Hoister

• 

  Lips Hoister

• 

  Hoister

• 

  Plate chain Hoister

• 

  Circular Conveyor

• 

  Packaging conveyor