Introduction
This machine is optimized for the needs of cutting large leafy vegetables such as spherical cabbage (cabbage) and Chinese cabbage into squares or long squares after repeated experiments. Compared with similar products, the main advantage of this machine is that the material will not stay in the gap between the disc knife and the cross-cutting knife, which meets the food hygiene requirements.
working principle
The material travels forward on the conveyor belt of the feeding trough. After being clamped and compressed by the upper pressure belt, the upper and lower auxiliary feeding rollers are relatively rotated and sent to the disc cutter to cut into long strips. The cutter is cut into squares or rectangles and is thrown out of the discharge port under the action of centrifugal force.
Cutting size
Replacing the disc knife assembly, that is, changing the distance between the disc knife, can cut strips of different specifications.
Changing the meshing gear between the disc cutter shaft and the cross cutter shaft or replacing the cross cutter assembly (that is, changing the number of cross cutters) can cut blocks of different specifications (users specify when ordering).
This machines randomly assembled cutters and hanging wheels are used to cut 30x30 squares. The disc cutter shaft hanging wheel has 76 teeth, and the transverse cutter shaft hanging wheel has 36 teeth. If you need to cut 20x20 squares, just remove the disc cutter assembly, replace another assembly, and then change the 85-tooth hanging wheel on the disc cutter shaft and the 27-tooth hanging wheel on the cross-cutting cutter shaft. Just fine.
Installation operation
1. After the machine is pushed to the installation position, the foot adjustment bolts on the four corners should be adjusted repeatedly until the machine remains level and stable.
2. Remove the plastic cover or cloth cover covering the machine, and check for any foreign matter (such as screws, nails, etc.) on the conveyor belt. Remove the protective cover of the belt pulley and move the large pulley by hand. If there is no abnormal sound and the rotation is flexible, the power can be connected.
3. There are three buttons on the power control panel of the machine: "forward", "reverse" and "stop". After turning on the power, press the "forward" button and the conveyor should move forward. If the conveyor moves backwards, rewiring is required. To ensure personal safety, the machine should be properly grounded at the grounding mark.
4. Press the "forward" button to start the motor. When it reaches the full-speed working state, the material can be smoothly and evenly spread on the conveyor belt of the feeding trough. When cutting cabbage (cabbage) and Chinese cabbage, the hard core is cut off in advance, and the thickness of the feed (compressed) is preferably less than 50mm.
note:
1. Dont let foreign objects such as knives, stones, nails and other hard objects mixed into the material, so as not to damage the cutter parts.
2. Keep your hands away from the upper conveyor belt to avoid crushing your fingers.
3. When the machine is running, do not remove the belt cover and protective plate to avoid serious injury.
4. If the raw material is too thick, which causes blockage between the upper and lower feeding rollers, do not squeeze and chop the material by hand. The "Reverse" button should be pressed immediately to allow the material to exit quickly. Or press the "Stop" button, stop immediately, completely remove the obstruction, and then turn the large pulley forward to confirm that there are no foreign objects in the cutting area before restarting the motor.
maintenance
This machine includes sharp blades, rotating parts and high-voltage power supply. When changing the cutting specifications and maintenance equipment, you must first disconnect and lock the power supply. After visually confirming that the equipment has completely stopped working, remove the protective cover and Disassembling, replacing parts, or it may cause serious injury.
(1) Daily maintenance:
1. Cleaning: At the end of continuous work or handover, disconnect and lock the power supply, remove all covers, and rinse with clean water.
2. Lubrication: 10 denier copper grease nipples are installed on the wall plates on both sides of the machine, all of which are copper-lined lubrication points. After the machine is running for 4-6 hours, open the upper and inner shells, and use a pressure lever grease gun. Fill the edible lubricating grease once.
There are also oiling holes at each end of the driven roller of the upper conveying belt assembly. Use a wooden block to raise the front of the upper conveying assembly, and you can see the countersunk screws at both ends of the driven roller through the holes in the shield. Remove the cross-recessed countersunk head screws and inject the edible lubricant with a pressure lever oil gun
Note: Before the above action, the power must be cut off to ensure that the machine is in a stopped state.
random accessories
20 disc cutter assembly, hanging wheel 85 teeth (nylon) 27 teeth (carbon steel), pressure rod type oil gun....
LG240Three-dimensionalCutter
LG240Three-dimensionalCutter
LG240Three-dimensionalCutter
LG240Three-dimensionalCutter
Ground height: 490 mm
Power: Cutting 2.2kw
Feeding trough: 300 × 950 mm
Exit size: 350 × 255 mm
Motor: Y112M-6
Weight: Machine weight 244kg, cutter head, knife 10kg
Cut specifications: cut 10X10-40X40mm
Feeding (compacting) thickness: less than 50mm
Dimensions: 1910 × 720 × 1370 mm
Feed tank height: 920 mm, discharge port height: 450 mm
Output: 500-2000kg / h (the larger the cut size, the higher the output)
Cutting specifications: 20 × 20, 30 × 30, also can be customized 10 × 10, 25 × 25, 40 × 40
Ground height: 490 mm
Power: Cutting 2.2kw
Feeding trough: 300 × 950 mm
Exit size: 350 × 255 mm
Motor: Y112M-6
Weight: Machine weight 244kg, cutter head, knife 10kg
Cut specifications: cut 10X10-40X40mm
Feeding (compacting) thickness: less than 50mm
Dimensions: 1910 × 720 × 1370 mm
Feed tank height: 920 mm, discharge port height: 450 mm
Output: 500-2000kg / h (the larger the cut size, the higher the output)
Cutting specifications: 20 × 20, 30 × 30, also can be customized 10 × 10, 25 × 25, 40 × 40
Introduction
This machine is optimized for the needs of cutting large leafy vegetables such as spherical cabbage (cabbage) and Chinese cabbage into squares or long squares after repeated experiments. Compared with similar products, the main advantage of this machine is that the material will not stay in the gap between the disc knife and the cross-cutting knife, which meets the food hygiene requirements.
working principle
The material travels forward on the conveyor belt of the feeding trough. After being clamped and compressed by the upper pressure belt, the upper and lower auxiliary feeding rollers are relatively rotated and sent to the disc cutter to cut into long strips. The cutter is cut into squares or rectangles and is thrown out of the discharge port under the action of centrifugal force.
Cutting size
Replacing the disc knife assembly, that is, changing the distance between the disc knife, can cut strips of different specifications.
Changing the meshing gear between the disc cutter shaft and the cross cutter shaft or replacing the cross cutter assembly (that is, changing the number of cross cutters) can cut blocks of different specifications (users specify when ordering).
This machines randomly assembled cutters and hanging wheels are used to cut 30x30 squares. The disc cutter shaft hanging wheel has 76 teeth, and the transverse cutter shaft hanging wheel has 36 teeth. If you need to cut 20x20 squares, just remove the disc cutter assembly, replace another assembly, and then change the 85-tooth hanging wheel on the disc cutter shaft and the 27-tooth hanging wheel on the cross-cutting cutter shaft. Just fine.
Installation operation
1. After the machine is pushed to the installation position, the foot adjustment bolts on the four corners should be adjusted repeatedly until the machine remains level and stable.
2. Remove the plastic cover or cloth cover covering the machine, and check for any foreign matter (such as screws, nails, etc.) on the conveyor belt. Remove the protective cover of the belt pulley and move the large pulley by hand. If there is no abnormal sound and the rotation is flexible, the power can be connected.
3. There are three buttons on the power control panel of the machine: "forward", "reverse" and "stop". After turning on the power, press the "forward" button and the conveyor should move forward. If the conveyor moves backwards, rewiring is required. To ensure personal safety, the machine should be properly grounded at the grounding mark.
4. Press the "forward" button to start the motor. When it reaches the full-speed working state, the material can be smoothly and evenly spread on the conveyor belt of the feeding trough. When cutting cabbage (cabbage) and Chinese cabbage, the hard core is cut off in advance, and the thickness of the feed (compressed) is preferably less than 50mm.
note:
1. Dont let foreign objects such as knives, stones, nails and other hard objects mixed into the material, so as not to damage the cutter parts.
2. Keep your hands away from the upper conveyor belt to avoid crushing your fingers.
3. When the machine is running, do not remove the belt cover and protective plate to avoid serious injury.
4. If the raw material is too thick, which causes blockage between the upper and lower feeding rollers, do not squeeze and chop the material by hand. The "Reverse" button should be pressed immediately to allow the material to exit quickly. Or press the "Stop" button, stop immediately, completely remove the obstruction, and then turn the large pulley forward to confirm that there are no foreign objects in the cutting area before restarting the motor.
maintenance
This machine includes sharp blades, rotating parts and high-voltage power supply. When changing the cutting specifications and maintenance equipment, you must first disconnect and lock the power supply. After visually confirming that the equipment has completely stopped working, remove the protective cover and Disassembling, replacing parts, or it may cause serious injury.
(1) Daily maintenance:
1. Cleaning: At the end of continuous work or handover, disconnect and lock the power supply, remove all covers, and rinse with clean water.
2. Lubrication: 10 denier copper grease nipples are installed on the wall plates on both sides of the machine, all of which are copper-lined lubrication points. After the machine is running for 4-6 hours, open the upper and inner shells, and use a pressure lever grease gun. Fill the edible lubricating grease once.
There are also oiling holes at each end of the driven roller of the upper conveying belt assembly. Use a wooden block to raise the front of the upper conveying assembly, and you can see the countersunk screws at both ends of the driven roller through the holes in the shield. Remove the cross-recessed countersunk head screws and inject the edible lubricant with a pressure lever oil gun
Note: Before the above action, the power must be cut off to ensure that the machine is in a stopped state.
random accessories
20 disc cutter assembly, hanging wheel 85 teeth (nylon) 27 teeth (carbon steel), pressure rod type oil gun....
LG240Three-dimensionalCutter
LG350DicingMachine
LG400DicingMachine
LG500DimensionalCuttingMachine
LG550VegetablesMachine
Model500DicingMachineTwistingDragonVersion
LG680VegetablesMachine
LG-750VegetablesMachine
FruitAndVegetableCutterVegetableCutter
LG700ReciprocatingVegetableCutter
LG500ReciprocatingVegetableCutter