Introduction

     LG-1200 centrifugal water shaker is a kind of general-purpose mechanical equipment for gap operation. It consists of casing, drum, chassis, boom, damping pressure spring, transmission box parts, clutch, and brake device parts. When the machine runs normally, the material is evenly distributed on the inner wall of the drum under the action of centrifugal force. The liquid attached to the material is thrown on the inner wall of the shell through the hole on the drum wall, and is discharged through the outlet after being collected. The solid materials remain in the drum to complete the separation process of centrifugal filtration. When the separation requirement is reached, the motor is turned off, the brake is stopped, and the material is manually removed from the drum.

    It is suitable for dehydration during vegetable processing and can effectively remove surface moisture during vegetable processing. The drum and shell of this product are made of stainless steel, which meets food hygiene requirements.

Operation method

     1. Before power-on operation, check the following parts.

         1.Release the brake handle and turn the drum by hand to see if it is bitten or stuck.

         2.Brake handle, whether the brake is flexible and reliable.

         3.Whether the connecting bolts of the motor are tightened, adjust the V-belt to an appropriate tightness.

         4.Check if the anchor bolts are loose

     2. Check the above to be normal before power-on dry running. The rotating direction of the drum must conform to the direction of the direction sign (the clockwise rotation must be seen from top to bottom).

     3. Put the materials into the drum as evenly as possible, and the weight of the loaded materials should not exceed the rated maximum loading limit.

Care and maintenance

     1. The centrifuge must be operated by a special person, and the loading limit must not be increased arbitrarily. When operating, pay attention to check whether the rotation direction is consistent;

     2. Do not increase the speed of the centrifuge at will. After 6 months of use, you must conduct a comprehensive inspection, clean the drum parts and bearings, and fill with lubricant;

     3． Check frequently that the solid parts of the centrifuge are loose;

     4． Within 6 months (counting from the date of purchase), the product quality is guaranteed by the Three Guarantees. If the machine is damaged or damaged due to improper operation, the user is responsible.

Centrifugal Spinner Machine

• 

  Automatic dehydrator

• 

  Belt Vegetables Pressing Machine

• 

  Centrifugal Spinner Machine

• 

  Automaticswing water production

• 

  Draining Machine

• 

  Stainless steel dehydrator