I. Introduction

    The vibration drainer is made of stainless steel, and the vibration source is generated by the exciter, so that the material is thrown forward on the screen for linear motion. This equipment is recommended for assembly line operation, the effect is better. Mainly used in dehydrated vegetables, food, plastics, chemical, pharmaceutical and other industries.

Instructions for use

    1. The body is fixed horizontally on the concrete foundation;

    2. The two vibration motors turn towards each other;

    3． The adjustment of the excitation force can be adjusted according to the type, weight and screening speed of the materials;

    4． Excitation force adjustment steps:

        (1) Remove the two vibration motor covers respectively;

        (2) Use an Allen wrench to remove an Allen screw on the balance block;

        (3) Loosen the motor shaft nut with a wrench;

        (4) Turn the balance weight to the next screw hole position;

        Note: The adjustment direction of the balance weights at both ends of the motor should be the same, and the adjustment weights of the two motors should be the same. The closer the balance weight is to the fixed balance weight, the larger the vibration force is, and vice versa.

    (5) Tighten the hexagon socket screws, tighten the nuts, and secure the cover.

Technical parameters:

Fourth, matters needing attention:

    1. Strictly abide by working rules and safe operating procedures;

    2. Vibration motors can be protected by ordinary motors;

    3. Always check that the screws are loose due to vibration.

Fifth, the organization diagram:

Draining Machine

• 

  Automatic dehydrator

• 

  Belt Vegetables Pressing Machine

• 

  Centrifugal Spinner Machine

• 

  Automaticswing water production

• 

  Draining Machine

• 

  Stainless steel dehydrator